blue beasty

Leaks an prone to bits dropping off

• Aug 24, 2017

• #21

I had an intermittent starter problem that turned out to be corroded live feed from battery to solenoid.

High resistance meant voltage was fine but not enough amps to kick everything over.

You should still be reading 12v at the starter with the solenoid tripped though even if there isn't enough juice to turn it over.

 

Vilkieboy

Member

• Aug 24, 2017

• #22

Cheers for that, going to change the battery to solenoid and solenoid to starter cables and see how that goes. Just getting fed up with this, if I could get it to turn the starter I can get on with putting everything else back together

 

Vilkieboy

Member

• Sep 1, 2017

• #23

UPDATE = Still not starting! Going to my local supplier who is going to make up a new solenoid to starer cable.......................fingers crossed.

 

Vilkieboy

Member

• Sep 14, 2017

• #24

ok........................................to date!
Changed all earth straps and starter to solenoid lead, got really excited...................turned the key...........................and got a f*****g click.

AAAAARGHHHHHHHHHHHHHHHHHH

 

J

John S

Well-Known Member

• Sep 16, 2017

• #25

Damn ****e **** x2. Just replaced the alternator and fan belt this morning. Went to start up and solenoid clicking! FFS! I've renewed the ignition system, new exhaust, new headlights...and now this ****e.

 

Vilkieboy

Member

• Sep 17, 2017

• #26

I feel your pain, I am going to try dragging it out of the shed, jump start or rocking it in gear.............if no change it is then getting loaded on a trailer and dragged to my land rover specialist (Mike Aitken in Ladybank, Fife) and pound notes being spent!


I hate defeat

 

Vilkieboy

Member

• Nov 5, 2017

• #27

Ok, just discovered that the starter motor has a short. Worked perfectly on the bench but one it had load applied it couldn't hack it and was shorting itself out.

Time to buy a new starter motor!

 

Vilkieboy

Member

• Apr 17, 2018

• #28

New starter motor in.........................and motor turns! happy days.

The rebuild is now gathering pace.

 

btiratsoo

Member

• Apr 17, 2018

• #29

Just read through this thread as I am suffering intermittent starting issues on my '82 SWB 2.25 petrol. Starts on the handle fine, but every now and then the dreaded click. Will start with a wiring overhaul and then move on to mechanical bits once that has all be proven. New solenoid and battery in stock ready just just in case!

 

Vilkieboy

Member

• Mar 17, 2019

• #30

So, the no spark saga dragged on and on......new points and condenser, starts first turn. Happy days

 

J

John S

Well-Known Member

• Mar 19, 2019

• #31

Vilkieboy said:

Ok, changed the solenoid, ignition coil, checked the earths..............................still getting nothing but a big click!!!

Really at my wits end here.

Click to expand...

Have you changed the plugs n HT leads? If so check the sequence.

 

Vilkieboy

Member

• Apr 15, 2019

• #32

ok, having changed every component linked to the ignition I finally splashed the cash and spent a disgusting amount of money (fiver) on new points and a condenser and lo and behold..........the old landy lives once more!