BENSPEED888
New Member
Hi everyone, having a nightmare starting my 2.5 diesel series three. The motor turns over ok and after spinning the motor probably 10 to 15 revolutions it fires up, runs for two or three seconds then dies. I had a feeling it might be the lift pump so I rebuilt it but the problem persists and is exactly the same. Anyone got any ideas? I've read about this cold start mechanism within the pump, is there a way of checking it is set up right? I only need it to run for 5 mins because I'm going to strip it, it's just almost impossible to strip it where it is.
Thanks
Ben
Thanks
Ben