Trumar said:

need help with this question please? Top of the windscreen where truck cab roof sits. I took the roof off and noticed there is no rubber seal between top of windscreen and roof, where does the rubber seal sit? How wide is the rubber seal? As it looks that I could fit 2 seals side by side? Cheers mark

Click to expand...

Land Raver said:

There should be a seal, about 6mm thick there.

Click to expand...

Trumar said:

I have the seal but I’m not sure where to fit the seal? I have placed the seal so that the nuts and bolts go through the seal but then there is a gap at the front of the roof to the windscreen. It just don’t look right?

Click to expand...

Land Raver said:

Yes, the seal is a thick neoprene type seal that sits on forward of the bolts on the lower ledge closer to the front of the screen.

Click to expand...

Blackburn said:

Seal goes forward of the bolts on normal roof so would think it is the same..

Click to expand...

Turboman said:

I am not certain there is a rubber seal.
A look at an exploded diagram in a parts book or manual would confirm.
If you are worried about it, just get some single sided adhesive foam tape, and make one. You can get is in different widths from RS onine, or other stockists.

Click to expand...

cornish rattler said:

I've always put a dollop of silicon on the seals aswell just incase the seal doesn't seal

Click to expand...