B

bakers

Member

• Oct 6, 2024

• #1

Hiya, simple question I hope!
I’m putting some door cards on the inside of the doors and need to use some self tapping screws, just a bit worried about the holes rusting, is there any way of protecting from the rust?

I’m guessing if I paint the holes it will just get dragged off again when I put the self tappers in

Steve

 

P

PaulJM

Active Member

• Oct 6, 2024

• #2

You could use "rivnuts" instead, m4 should be plenty big enough. You could then paint the holes

 

L

lynall

Well-Known Member

Full Member

• Oct 6, 2024

• #3

Put some grease on the screws, just normal grease will do fine.
It will not be long before they rattle loose anyway!

 

dag019

Well-Known Member

• Oct 7, 2024

• #4

PaulJM said:

You could use "rivnuts" instead, m4 should be plenty big enough. You could then paint the holes

Click to expand...

Or file little square holes that can then be painted and preserved and fit RTC3745 which the screw then goes into.