pete980

Member
I realise that this post has probally been done a million times & Xeng do some great security products

I just wondered if anybody had any experience of using one of these Mul_T locks
 

Attachments

  • multi lock.jpg
    multi lock.jpg
    30.1 KB · Views: 194
Never seen or heard of it :confused: what is it?

It is a Clifford thatcham aproved gear lever lock had it fitted in my old escort s1 rs turbo many moons ago then had it removed by locksmith when i sold the car been sitting in a box in the garage for a few years now
 
it is quite a solid bit of kit & has snap off bolts so once fitted cant be removed easily
But might have to make a bracket to weld to the chassis to get it in the right place
 
I removed one from a Nissan sunny gtir with a hammer in about 30mins, they are a solid bit of kit and it was easier to smash the car to bits than attack the device directly

on a defender I would want to toughen up the gearstick with some stainless tube slipped over it or weld some rebar to it to prevent easy cutting
 
Last edited:
I removed one from a Nissan sunny gtir with a hammer in about 30mins, they are a solid bit of kit and it was easier to smash the car to bits than attack the device directly

on a defender I would want to toughen up the gearstick with some stainless tube slipped over it or weld some rebar to it to prevent easy cutting

Decent enough deterant then if it took 30mins to smash it off
Like the gearstick strenthening idea
 

Similar threads