Wagon Loon
Well-Known Member
Hi everyone,
I’ve got my eye on a Series IIa which has recently been restored.
During the restore, the chap fitted a ‘soft-top front seat belt bar‘, to enable inertia reel seat belts to be fitted.
If I buy it, I’d like to return it back to original.
Can I please ask a favour?
Would someone please mind sharing some photos of their soft-top Series IIa seatbelts and seatbelt mounts?
I’m keen to understand the difference between what he’s fitted and the original spec.
Much appreciated.
I'm sure you've either kept the modified setup, or found the original three point static arrangement fitted from 1964. NOT lap belts, but a manually adjustable three point belt for the driver and passenger front.
If your interested, I'm currently restoring mine on a series three 1974 88.
The top connects a caribena like connector. I'm sure it's as yours would most likely have been, and if your still interested in making as original, I could get some pictures.
Because I'm replacing my gearbox, had to remove the seat box , which I've fully restored and rebuilt as original, due to galvanic corrosion by the bottom seat belt mounting points.
Consistently in doing the same with my seatbelts due to bits being rusty, which would not work aesthetically with the rebuilt seat box and floor. So sandblasting the bottom steel mounts and repainting black, and fitting new the point static belts as the originals, just not Brittax, but Securiton, as brittax no longer seem to make them.
I considered the bar mounted Defender system, but would rather keep it factory