0

09richardk

Member

• Dec 31, 2014

• #1

Hi where does this seal go part number is mwc6130? Is it on the door or the sill? If so am I missing another seal thanks

 

jamesmartin

Well-Known Member

• Dec 31, 2014

• #2

sill

 

0

09richardk

Member

• Dec 31, 2014

• #3

Thanks do I need a seal that fits on the bottom of the door as there's nothing on mine just a bit gap?

 

jamesmartin

Well-Known Member

• Dec 31, 2014

• #4

not as std, hows your door fitted and condition might account for an excessive gap,though you can buy aftermarket seals you could fit, ive used these for a few jobs they have quite a few profiles if you look through
https://www.google.co.uk/url?sa=t&r...qJtrljmF2trlcs92w&sig2=pM40PfytHNWkOvV8h4wUyw

 

0

09richardk

Member

• Dec 31, 2014

• #5

It's had new doors how does the sill seal fasten as there's no holes do I have to sill off ?

 

aaronmorris

Head's a shed

• Dec 31, 2014

• #6

Didn't the td5's onwards have a seal on the door bottom instead of the sill.
Not sure what yours is, just a thought though.

 

0

09richardk

Member

• Dec 31, 2014

• #7

It's a 2002 td5 it didn't have any on it so Im not sure what i need

 

aaronmorris

Head's a shed

• Dec 31, 2014

• #8

Bottom of doors then. I can't be any help with part numbers though, have to look through parts book.

 

GuamBomb

Member

• Dec 31, 2014

• #9

Seal Front Door Bottom 90/110 to LA 1994
#MWC6130

This is the seal that attaches to the lower portion of the body (not door) via rivets in order to provide a seal between the body frame and lower portion of the door. I know this because I just replace them on my 1991 Defender 90.

 

0

09richardk

Member

• Dec 31, 2014

• #10

Does anyone no the part number for the seal that fits on the bottom of the door ? Thanks

 

GuamBomb

Member

• Dec 31, 2014

• #11

Page 843 shows part number ALR6250 (note 3)
http://www.retroanaconda.com/landrover/parts_books/90/9_body_chassis_p794-923.pdf

Here is a pic of the part on the JC site. I have no idea how it attaches since I have an older 1991 Defender where the seal MWC6130 attaches to the sill vice the newer defenders where the seal is on the door itself.

ALR6250 - Front Door to Sill Seal 90/110 from 1994MY

Its always best to have your VIN, serial numbers of axles, type of trannys, etc handy when looking through the parts book and ordering parts.

 

J

jde

New Member

• Feb 4, 2015

• #12

Does anybody know what size Rivet is used for the door Sill?

I have taken my door seal off and tried to use the rivets I had left over in the garage and the pop Rivet gun I have couldn't get close enough to the sill to get a nice fit, any solutions?

Do I take the Sill off to door this ??

Thanks in advance
Jord