Leebastard

Active Member

• Aug 20, 2013

• #1

Hi chaps, I am having a right ball ache fitting some impreza seats to my 90. I have trawled the forum and can't fans anything very descriptive. Does anyone have a how to of a descriptive guide to help?
Thanks

LB

 

the_wolf

Well-Known Member

• Aug 20, 2013

• #2

It's probably been done but a photo of the base of the seat and the mounting brackets might help

 

chunkymunky

New Member

• Aug 20, 2013

• #3

What he says.

 

Leebastard

Active Member

• Aug 20, 2013

• #4

Yeah I have read a few threads on it being done. But no one has posted pics of how they mounted them. The front holes line up, it's just the rear ones that are a ball ache.

 

defender11069

AKA Mr cool...

• Aug 20, 2013

• #5

drill new holes

 

Leebastard

Active Member

• Aug 20, 2013

• #6

 

Leebastard

Active Member

• Aug 20, 2013

• #7

 

defender11069

AKA Mr cool...

• Aug 20, 2013

• #8

this is how id do it first grind the old brackets off. seat will be to high any way then id weld flat plates on each end of runner drill holes and jobs a good one if no welder can use hole's already in runners plenty there to use...you can use wot you cut of for mounting plates thats wot i did

 

Last edited: Aug 20, 2013

chunkymunky

New Member

• Aug 20, 2013

• #9

For the new holes fit captive nuts.

 

defender11069

AKA Mr cool...

• Aug 20, 2013

• #10

or wing nut's