S884 · Oct 24, 2015

So although there hasn't been much posts a few little bits have been done to the land rover, we started on the whole gearbox/transfer-box/bell-housing assembly trying to get a few more bits done, first off the hand brake drum was cleaned and painted in satin black

After this we decided to clean up the gearbox, this involved cleaning the steel casing with wire wheels then painting yellow, and the aluminium casing was just cleaned up with stainless steel wire wheels on the dremel. The gear leverage assembly's were taken apart, cleaned and rebuilt with fresh grease and the casings were polished

Then today we spent 10 or 15 minutes cleaning the bell housing up so it can be etch primed and painted

Brown · Oct 24, 2015

That's a very clean gearbox.

S884 · May 24, 2016

So as a few of you have noticed no progress has been made on the land rover for a while now, this was due to having to move out of the garage we was working in originally, we therefore moved closer to home to my granddads garage to carry on with the build, however due to a change in circumstances we now don't have access to that garage either, and therefore have no place to store or rebuild the land rover......
We're obviously very gutted about this but it has to be done, so we've decided we will now sell the land rover, ideally we want to sell the land rover as a whole project to be completed by someone, but if no one is interested it will just be sold for parts, so if anyone is interested in buying the land rover as a whole, or buying any parts don't hesitate to get in touch, thanks people

Al2O3 · May 24, 2016

You have got to be joking! All the body panels, in the original pictures, looked in really good condition. Now I realise that underneath the panels may need a bit of attention, but the body looked like it could just drop on to the rolling chassis you've created. There has to be a solution, it'll be mint when its finished.

S884 · May 25, 2016

Al2O3 said:
You have got to be joking! All the body panels, in the original pictures, looked in really good condition. Now I realise that underneath the panels may need a bit of attention, but the body looked like it could just drop on to the rolling chassis you've created. There has to be a solution, it'll be mint when its finished.

As much as we would love to complete the project, we just don't have the time to do it sadly so this is the only option at the moment

Al2O3 · May 25, 2016

Well, I'm devastated for you.
Someone is going to score for a cracking start to a project and a sturdy vehicle with a long life ahead of it.

raywin · May 25, 2016

Al2O3 said:
Well, I'm devastated for you.
Someone is going to score for a cracking start to a project and a sturdy vehicle with a long life ahead of it.

Agree with that 100%, must be heartbreaking after the effort you put in, and the quality of what you have done, only hope that it goes to someone who can finish it in the way it should be done so that this will not be lost.

aaronmorris · May 25, 2016

I feel for you bud after the time and effort you have put in, seems such a shame, hopefully whoever buys it will do it justice.

S884 · May 26, 2016

Al2O3 said:
Well, I'm devastated for you.
Someone is going to score for a cracking start to a project and a sturdy vehicle with a long life ahead of it.

yes we are very gutted, I have to say we've learnt a lot and we'll definitely try again once we're properly set off so i'm sure this isn't the last you'll see of us

raywin said:
Agree with that 100%, must be heartbreaking after the effort you put in, and the quality of what you have done, only hope that it goes to someone who can finish it in the way it should be done so that this will not be lost.

It would be very nice to see it done, just hope someone has the enthusiasm to complete it to the condition we imagined ourselves though, so far we've mainly been getting daft offers from people trying to take it off our hands, mainly restoration companies and breakers yards trying to make some quick money

aaronmorris said:
I feel for you bud after the time and effort you have put in, seems such a shame, hopefully whoever buys it will do it justice.

It makes it so much worse thinking back to the effort we've put in, all the hours sat shot blasting getting covered in crap, and all the hours spent messing about trying to undo seized bolts, feels like it's all been for nothing

Al2O3 · May 26, 2016

Where have you got it for sale? It's not in the for sale section on here!

S884 · May 26, 2016

Al2O3 said:
Where have you got it for sale? It's not in the for sale section on here!

Its for sale on ebay as a rolling chassis with V5, I'll then just sell the rest of the parts separately afterwards

Al2O3 · May 26, 2016

S884 said:
Its for sale on ebay as a rolling chassis with V5, I'll then just sell the rest of the parts separately afterwards

Yep, I've had a look and it looks good.
I hope you get a decent price for it. Good luck.

adrian82 · May 27, 2016

I can't find it on eBay has it finished

Al2O3 · May 27, 2016

It was a buy it now or offers. Found it straight away last night. Not there now.

S884 · May 28, 2016

adrian82 said:
I can't find it on eBay has it finished

It has finished now yes

Al2O3 said:
It was a buy it now or offers. Found it straight away last night. Not there now.

Someone bought it on ebay and should be coming to collect it on wednesday

Al2O3 · May 28, 2016

Sorry to be cheeky, but did you get anything near what you were asking for it?

S884 · May 28, 2016

Al2O3 said:
Sorry to be cheeky, but did you get anything near what you were asking for it?

Not cheeky at all, there was a lot of interest but everyone wanted to buy everything as appose to just the rolling chassis, we've made a loss of £2000 not even counting the amount of man hours that went into it, but you live and learn I guess

Al2O3 · May 28, 2016

That loss must include the original price of the vehicle.

S884 · May 29, 2016

Al2O3 said:
That loss must include the original price of the vehicle.

It does yes, we spent £8k including the vehicle, and if the sale goes through we'll get £6k back

Al2O3 · May 30, 2016

Well, if someone who knows what they're doing bought the lot, they've got a cracking deal. That going to be great vehicle for £6k+

Member

Attachments

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Head's a shed

Member

Well-Known Member

Member

Well-Known Member

Active Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Member

Well-Known Member

Similar threads