Druim
Well-Known Member
Have you watched the video clips how to use it and what to do when no response?
Chrisfrain2007
Active Member
If you haven't got the slow 35mph message on its time to check compressor output
Datatek
Well-Known Member
The most likely problem is the compressor is not making enough pressure as it's shagged due to feeding leaking airsprings and quite possibly the thermal trip has expired for the same reason.But I´m a man !!!! we dón´t do that "girly" thing , do we
Could be the overheatthermistor , Watched a rsw video and it seemed to fit.
But doesn´t his software indicate faults like that ??
Run the compressor from the software and do the check in the "How To" section for pump pressure.
kevwill
Active Member
'Vehicle has moved' just means the wheel/height sensors have moved. Nothing to worry about. Its probably sunk down a bit since you were last in the car. As datatek says, probably the compressor needs checking out. You can buy new seal/cylinder repair kits for this. Worth checking the bags and air lines for leaks. Quickest way for a pump to wear out if its forever working trying to compensate for a leak in the system.
Datatek
Well-Known Member
If the airbags are original they will be leaking, they have a design life of 7/8 years 80K miles. Fitting a new compressor is money down the drain if you don't do the airbags. A new seal kit for the compressor is about £30 amd half an hours work to fit.I´m going to order a completly new compressor unit from Paddocks .
If the suspension works after that I will check the airbags , and maybe replace them .
`cause the RR is to be the "civilian" transport for me and my sons , the 130 is the Hunting and lessiure vehicle
Datatek
Well-Known Member
Yes, do a forum search, it's been listed a few times, costs very little.
Why is it that trying to advise people is sometimes akin to banging your head against a wall?
