B

BROWNY13

New Member

• Feb 27, 2013

• #1

Hello everyone,
Quick question. I have a 94 300tdi disco 1 3 door with steel wheels.
I recently acquired a set of 16 inch 3 spoke RRC alloys.
From the searches I have done it seems they will fit fine but I noticed a few people saying the weight may be too much for the wheels??
Apologies if this has been answered already, couldn't find a definite answer.
Please feel free to remove or relocate this thread if it's already been covered. Thanks for your advice.

 

Q

Quark

New Member

• Feb 27, 2013

• #2

Have a set on my 98 Disco chassis for moving it about while its being worked on, they fit ok. I would have thought the weight would not be a problem as a RRC would be about the same weight as a Disco, it would be different if you were putting them on a 110 though.

 

B

BROWNY13

New Member

• Feb 27, 2013

• #3

Many thanks for the reply.

 

P

Planny

New Member

• Feb 27, 2013

• #4

Will be no problem at all.

 

B

BROWNY13

New Member

• Feb 27, 2013

• #5

Thank you Planny.

 

discool

Well-Known Member

• Feb 27, 2013

• #6

But they do look better on a RRC

 

Attachments

• 
  RANGE ROVER 1987.jpg

  592.8 KB · Views: 762

Dewin

Well-Known Member

• Mar 1, 2013

• #7

RRC and Disco 1 have the same chassis/running gear ... I think the GVW of the RRC is slightly higher though. I've seen quite a few Disco's using those wheels over the years.

 

wiltshire landyman

I’m back

• Mar 1, 2013

• #8

Probably the ugliest lr rim

 

B

BROWNY13

New Member

• Mar 1, 2013

• #9

Many thanks for the replies.
My reason for doing this is that I'm getting some new tyres (grabber AT2's) and theyre worth about the same as the car.
If the car breaks I can just put the old steels and road tyres back on if need be.
The wheels were only £25 and with a lick of black paint should look ok but I agree they're not the nicest landy alloys!