Hi,Looking some advice I have a 2002 Freelander Td4 currently 97,000 miles on her, after following some good advice on here i have stripped the air intake the EGR valve cleaned and replaced(have not done clanking mod yet not sure on benefit) and changed the crankcase breather, was looking at re-mapping and i came across this RON box has anyone heard of these? how good are they? ,do they work and how hard are they to fit (is there anyone living in northern ireland who have fitted one so i could call and have a yarn with you).
After cleaning the air intake etc as above i noticed the idle now sits around 600 rpm (Previous around 750 rpm) and the temp gauge which previously religiously sat mid way on the gauge now only sits there when engine is pushed on, then it will return to slightly below mid way which is puzzling me along with the tick over, any thoughts ?
After cleaning the air intake etc as above i noticed the idle now sits around 600 rpm (Previous around 750 rpm) and the temp gauge which previously religiously sat mid way on the gauge now only sits there when engine is pushed on, then it will return to slightly below mid way which is puzzling me along with the tick over, any thoughts ?