Did you put any gunk on it as well?
Are you sure it didn't slip a bit when you put it on?
and what does the manual say about gunk?
I haven't done one for so long I cannot remember.
Just checked in RAVE, it doesn't mention any gunk. All it says is to do the bolts up to the correct torque and that the rocker cover seals can only be used up to 5 times.
i seem to remember I had the same problem. Just ignored it as they all leak!
But I'd follow @lynall 's advice re the D shaped parts of the gasket.
As for sealant, I think I'd use RTV silicone stuff.
Others will have their favourites.
Just checked in RAVE, it doesn't mention any gunk. All it says is to do the bolts up to the correct torque and that the rocker cover seals can only be used up to 5 times.
i seem to remember I had the same problem. Just ignored it as they all leak!
But I'd follow @lynall 's advice re the D shaped parts of the gasket.
As for sealant, I think I'd use RTV silicone stuff.
Others will have their favourites.
The 200 are the same, but the 200 D bits are actually separate parts from the main gasket.
Wellseal is quite good, but do not use on bare skin Iirc cancer issues?
Blu hylomar, Wellseal, basically anything that can move a little.
