Hey y'all
Looking at the rover it's possibly sitting a bit low for normal ride height setting. Can anyone tell me the correct ride height for front and rear? Wondering if the airbags are getting saggy!
Cheers
 
Ride height is governed by the height sensors so sagy airbags will not affect the ride height.
 
most coman issues with the l322 is height sensor bush on the suspension arm sticking and bending and twisting the arm to the sensor
 
I'll look into all of these, the bushes need replaced at the back anyway so I'll do that soon and check the sensors at the same time. Could any of these issues relate to the rear brakes sticking when it is at access height? Almost seems like it goes so low that something is twisting and causing them to stick on :/
 
With All Comms and Snapon sirius (?) you can do a EAS calibration by inputting the current heights then get heights from the car software then when you click calibrate, it does an offset between actual and sensor input heights to level out the car back to standard height.
 

Similar threads