pumpkinboy1991

pumpkinboy1991

Member
Hey y'all
Looking at the rover it's possibly sitting a bit low for normal ride height setting. Can anyone tell me the correct ride height for front and rear? Wondering if the airbags are getting saggy!
Cheers
 
Ride height is governed by the height sensors so sagy airbags will not affect the ride height.
 
most coman issues with the l322 is height sensor bush on the suspension arm sticking and bending and twisting the arm to the sensor
 
I'll look into all of these, the bushes need replaced at the back anyway so I'll do that soon and check the sensors at the same time. Could any of these issues relate to the rear brakes sticking when it is at access height? Almost seems like it goes so low that something is twisting and causing them to stick on :/
 
With All Comms and Snapon sirius (?) you can do a EAS calibration by inputting the current heights then get heights from the car software then when you click calibrate, it does an offset between actual and sensor input heights to level out the car back to standard height.
 
You must log in or register to reply here.

Similar threads

S
L322 02 Air Suspension inactive fault
Replies
6
Views
803
gold rover
gold rover
D
L320 suspension query
Replies
6
Views
352
Graculus
Graculus
M
LR3 RIDE HEIGHT MODULE
Replies
2
Views
309
sierrafery
sierrafery
S
Height suspension / sensor issue - can't calibrate
Replies
3
Views
952
Graculus
Graculus
zpbassham
Ride Height Sensor Replaced
Replies
2
Views
751
brianp38dse
brianp38dse