Snaggapuss

Active Member

• May 20, 2019

• #1

Hej, been trying to sort out a fault on the ride height sensor on my F2 SD 2010, the gap OBD11 was telling me something wrong with earth on height sensor. Went to have a ganders saw connector to the ride height sensor though okay will disconnect and give it a good spray with electrical cleaner only to have the connector disintegrate as I tried to disconnect. Anyone know where I can get a new cable it goes from height sensor to a box on the diff with another cable splitting of that and going who knows where.

 

Arctic2

Well-Known Member

• May 20, 2019

• #2

Can you put a photo up of the connector and where it is on the diff.

 

T

td4van

Well-Known Member

• May 21, 2019

• #3

Do you have factory fit xenons?

Not sure why the height sensors would go into rear diff as they’re only used for auto headlight levelling on xenons

 

Snaggapuss

Active Member

• May 22, 2019

• #4

my bad they went to box on the vcu? the auto box before the diff. anyways here are the photo's

my finger is on the wire that goes to who know where, it is the one behind the abs wire.
the others are of the box it plugs into, couldn't get camera to show where it plugs into, it is going to be a pig to unplug it. then there is the actual connector into the height sensor.

 

Attachments

• 
  image.png

  21.1 KB · Views: 157

Snaggapuss

Active Member

• May 23, 2019

• #5

Arctic2 said:

Can you put a photo up of the connector and where it is on the diff.

Click to expand...

photo's uploaded

td4van said:

Do you have factory fit xenons?

Not sure why the height sensors would go into rear diff as they’re only used for auto headlight levelling on xenons

Click to expand...

yes I have the xenons