B

bandit600

New Member
can anyone tell me what the wires on the main plugs coming from the body of a 1.8 freelander go to/supply

having loads of trouble finding this info on the discs even tried getting a L series engine loom without look.

i plan to convert my 1.8 to a rover L series now going to use my sdi intercooled engine with Bosch ECU to make it easier as the other engine was using a rover ECU.

so now i need to wire the rover engine loom to fit the freelander body loom but as stated no where on the rave disc does it explain what the wires do or go to.:confused:

have been told the body looms are the same

can any ony help or sell me a freelander L series engine loom????

failing this i will have to find a petrol engine to refit but no fun in that :(

dean
 
World Of the Rover
228, Waterloo St, Bolton, Lancashire BL1 8HU
Tel: 01204 366630
Car & Commercial Vehicle Dismantlers


found this on yell.

theres a good chance that they might know what you need to know.
il keep looking as im in works time.... and theres sod all to do.. and im in charge today anyway!
 
mickobrien said:
World Of the Rover
228, Waterloo St, Bolton, Lancashire BL1 8HU
Tel: 01204 366630
Car & Commercial Vehicle Dismantlers


found this on yell.

theres a good chance that they might know what you need to know.
il keep looking as im in works time.... and theres sod all to do.. and im in charge today anyway!
Click to expand...

lucky you my spare time involves phone calls and hours on here :D

just called them was helpful but never had parts or couldnt tell me the wiring combo

thanks for that anyway

dean
 
Dont give up Dean!!

Your deisel coupe was fantastic - and the standard of work was spot on!!

This could be a very good little sideline for you and If I ever have to replace my engine I would consider a deisel conversion.

Regards,

Steve
 
G13SJC said:
Dont give up Dean!!

Your deisel coupe was fantastic - and the standard of work was spot on!!

This could be a very good little sideline for you and If I ever have to replace my engine I would consider a deisel conversion.

Regards,

Steve
Click to expand...

lol consider it now :D please

think i know what needs doing apart from the wiring now if i can get a loom or info to the wire outs that should be sorted

dean
 
The Mad Hat Man said:
get yoself a rave disk - it tells yu connectors and pin-outs.
Click to expand...

got 1 but its not on there or i just cant find it after approx 30 hrs of searching:eek:

i also had to do this on my coupe conversion using a rave disc i found it ok but the freebie disc seems not to have it:eek:

cheers
 
found another couple.

Formerly Imperial Rover, Rover SD1 and 800 breakers. Naze Lane Industrial Estate, Freckleton, Nr Preston. Now with a web site. Check them out for Mk1 and Mk2 parts inc spoilers and specialising in reconditioned gearboxes: manual, auto and torsen lsd. 01772 635728 email FRC800@hotmail.co.uk.

Links and Addresses

harder than you think int it....... kills some time... exell speadsheet on top this underneath!!!!!
 
Bandit, are you sure Rave hasn't what you need like MHM suggests? There should be an Electrical library with sub sections like Connector; Fuse Details; Earth points and Headers dia's; plus Connector section. Am attaching typical from Connector section. ???????
 

Attachments

  • Conn_detail.jpg
    Conn_detail.jpg
    45.7 KB · Views: 175
mickobrien said:
found another couple.

Formerly Imperial Rover, Rover SD1 and 800 breakers. Naze Lane Industrial Estate, Freckleton, Nr Preston. Now with a web site. Check them out for Mk1 and Mk2 parts inc spoilers and specialising in reconditioned gearboxes: manual, auto and torsen lsd. 01772 635728 email FRC800@hotmail.co.uk.

Links and Addresses

harder than you think int it....... kills some time... exell speadsheet on top this underneath!!!!!
Click to expand...

cheers for this again will check them out later this morning

dean
 
Miles000 said:
Bandit, are you sure Rave hasn't what you need like MHM suggests? There should be an Electrical library with sub sections like Connector; Fuse Details; Earth points and Headers dia's; plus Connector section. Am attaching typical from Connector section. ???????
Click to expand...

hi

yes i have that and gives wire colour code but it dont show where it runs to or what its for, on the rover rave disc it gives the wire colour then the pin number and what it works, either i cant find it or its not on here:confused:

i have spent hours searching it but still cant see the details


cheers dean
 
mickobrien said:
found another couple.

Formerly Imperial Rover, Rover SD1 and 800 breakers. Naze Lane Industrial Estate, Freckleton, Nr Preston. Now with a web site. Check them out for Mk1 and Mk2 parts inc spoilers and specialising in reconditioned gearboxes: manual, auto and torsen lsd. 01772 635728 email FRC800@hotmail.co.uk.

Links and Addresses

harder than you think int it....... kills some time... exell speadsheet on top this underneath!!!!!
Click to expand...

called them and no good, anyone would think i was looking for rocking horse s*** :D

thought the bits for the coupe convert was hard to find :)


oh well keep looking bit peed as had to tax the thing to stop the clampers who are doing the rounds at the moment :mad:
 
just spoke to a friend of a friend and he told me the the guy a Simmons Commercials is a landy nut. i don't know him but a have seen his rides.
from what i gather they look after all the army fleet of landys as well as the big stuff 7.5 tonners and above. hope this helps

good luck

mick

Simmons Commercials
Clarke Street
Poulton Business Park
Poulton le Fylde
FY6 8JR
Lancashire
Tel: 01253 884521
Fax: 01253 890405
 
mickobrien said:
just spoke to a friend of a friend and he told me the the guy a Simmons Commercials is a landy nut. i don't know him but a have seen his rides.
from what i gather they look after all the army fleet of landys as well as the big stuff 7.5 tonners and above. hope this helps

good luck

mick

Simmons Commercials
Clarke Street
Poulton Business Park
Poulton le Fylde
FY6 8JR
Lancashire
Tel: 01253 884521
Fax: 01253 890405
Click to expand...

cheers will give em a call

anythings worth a shot at the moment, its killing me not being able to jump in it lol

dean
 
You must log in or register to reply here.

Similar threads

P
Freelander 1 Any L-series owners near me (south east England)?
Replies
5
Views
334
xDParis64
xDParis64
P
Freelander 1 L-Series Bosch diesel ECU replacement process?
Replies
8
Views
373
pscan.eu
P
ryan_1993
Engine loom has melted on my 300 tdi
Replies
18
Views
1K
Dippypud
Dippypud
N
Series 2a 69/70 wiring mess
Replies
7
Views
480
grewth
G
S
Freelander L314, does anyone know how to do the timing belt without using the flywheel locking.
Replies
4
Views
560
Soggybite3
S