B

bola

New Member
Hi, new to the forum as I have just bought a P38 4.6 V8 project :)

First job is the head gaskets, trying not to spend too much but they are currently away being pressure tested and skimmed.

What else should I replace whilst I am there? Will replace valley gasket, exhaust manifold gasket, rocker cover gaskets and the head gaskets. Is it worth chaning the injector O-rings or anything else?

Also what is the best head gasket to buy without spending the earth?

Cheers
 
block for a top hat linered one ,ive never come across many that just needed head gasket though possible
 
head gasket has just blown between two pistons, pistons and bores look fine though. Any other particular way to check it needs new liners?
 
bola said:
Hi, new to the forum as I have just bought a P38 4.6 V8 project :)

First job is the head gaskets, trying not to spend too much but they are currently away being pressure tested and skimmed.

What else should I replace whilst I am there? Will replace valley gasket, exhaust manifold gasket, rocker cover gaskets and the head gaskets. Is it worth chaning the injector O-rings or anything else?

Also what is the best head gasket to buy without spending the earth?

Cheers
Click to expand...

I used island 4x4 full head gasket set on my 4.6. Reasonable price and very quick delivery. Plus they are helpful on the phone if you need to check compatibility. Went for the oem quality not the britpart. Good luck with it.
 
pwood999 said:
I was replying to Madbritt, although was on phone so could have replied to wrong thread !! besides I didn't start reviving this old thread
Click to expand...

Read his post to a 2012 post makes no sence...I always check date of last post before responding can't stand years old threads being resurected not by the OP...who was Madbritt replying to?...lol
 
brianp38dse said:
The trouble is if your on a mobile you dont see the dates
Click to expand...
You need to wind it up a little more.
Screenshot_20210926_100342_com.android.chrome.jpg
:p
 
On topic, there's no chance I'm spending £30 per arp stud when i can buy a set of standard bolts for £10
 
You must log in or register to reply here.

Similar threads

MAF Diver
Disco 2 Replacing head lining, what else should I do while I’m there? Sunroofs? Drains? Wiring?
Replies
6
Views
487
tilly2
T
jimmacD
Back to the P38 house of pain!
2
Replies
21
Views
2K
Grrrrrr
Grrrrrr
R
Freelander TD4 starting problems
Replies
8
Views
1K
Nodge68
Nodge68
J
90 Defender 300Tdi engine swap - update & question
Replies
4
Views
1K
jer_300Tdi_90
J
_Snowy_
Td5 fan belt shredded, tensioner seized, coolant all gone - How bad can it be & what else to check?
Replies
4
Views
1K
_Snowy_
_Snowy_