RangeRoller dt
Well-Sprung Member
Wouldn’t think so.
Be careful make sure you know 100%, some need spigots etc and people do fit them without even though that is a very dangerous thing to do.
The people that will know will be here tomorrow
Be careful make sure you know 100%, some need spigots etc and people do fit them without even though that is a very dangerous thing to do.
The people that will know will be here tomorrow
ukadamwest
Well-Known Member
all three variants have the same bolt pattern, but different offsets..
have a look here
https://www.wheel-size.com/size/land-rover/range-rover-sport/2008/
have a look here
https://www.wheel-size.com/size/land-rover/range-rover-sport/2008/
Nice site that. Very useful.
Hi all. Long time, no speak! Life does get in the way sometimes, doesn't it!
I just googled this question about whether L494 wheels can bolt directly onto an L322 and it led me to this thread. From enquiring and the website above, as batman suggests, the bolt pattern appeares to be the same, at 5 x 120, as is the centre bore, at 72.6, but the offset is less at ET47, as opposed to ET57 on the L322 (I'm wanting to fit 20 inch wheels, fitted with 255/50 x 20 tyres, BTW). Is this slight difference significant?
Apologies for sounding like a newbie/lazy but I'm no wheel expert and, as usual on various forums, you read various opinions, from yes to no, of course.
I did read that 405 wheels (that's Range Rover, not Peugeot! ;-) ) will bolt straight on with the later model, conical head, wheel nuts (are they conical or tapered?).
If anyone could give a definitive answer, I would be very grateful (before splashing-out needlessly on the 405 wheels).
Many thanks and season's greetings!
I just googled this question about whether L494 wheels can bolt directly onto an L322 and it led me to this thread. From enquiring and the website above, as batman suggests, the bolt pattern appeares to be the same, at 5 x 120, as is the centre bore, at 72.6, but the offset is less at ET47, as opposed to ET57 on the L322 (I'm wanting to fit 20 inch wheels, fitted with 255/50 x 20 tyres, BTW). Is this slight difference significant?
Apologies for sounding like a newbie/lazy but I'm no wheel expert and, as usual on various forums, you read various opinions, from yes to no, of course.
I did read that 405 wheels (that's Range Rover, not Peugeot! ;-) ) will bolt straight on with the later model, conical head, wheel nuts (are they conical or tapered?).
If anyone could give a definitive answer, I would be very grateful (before splashing-out needlessly on the 405 wheels).
Many thanks and season's greetings!
Last edited:
stuu
Well-Known Member
The et47 vs 57 if they're same width wheel the 47s will sit 10mm outwards more
Willtheyfit.com will explain
If they sit outside the wheel-arch then they'll be illegal because any spray will go skywards.
Might get some odd effects with the wheel centre not aligned with the hub centre as well. Doesn't sound like a good idea to me.
Thanks stustrong
Well some of those cyclists could do with a cold shower anyway!
Hmmmm, thanks Grrrr, more food for thought
stuu
Well-Known Member
Yeah for example my drift car i went from 17x7 et47 to 17x8 et20, the et is worked out on the wheel width so the 17x7 et47 vs et20 would be 27mm of diffrence, but with the 17x8 being a 25mm wider wheel its only 12mm out more, my old range rover td6 was on 20inx9 275/45r20 vs the oem 18x7 255/60/18 (unsure of et numbers) but they still sat within arches and didn't foul anything
Hi
also hope u don’t mind me adding but have to also check the rims are weight rated accordingly with the sport being lighter than a FFRR
know RRS rims can’t be fitted to a D3 because of that , along with advising ur insurance company
plus of course know ur not but always hate seeing low profiles on a FFRR
once again hope u did mind me mentioning the rim KG capacities
also hope u don’t mind me adding but have to also check the rims are weight rated accordingly with the sport being lighter than a FFRR
know RRS rims can’t be fitted to a D3 because of that , along with advising ur insurance company
plus of course know ur not but always hate seeing low profiles on a FFRR
once again hope u did mind me mentioning the rim KG capacities
