wesky77

Member

• Apr 26, 2018

• #1

Hi Everyone

I have a 2004 Freelander td4, and a recent mot advised changing both rear diff mounts as the rubber was very worn. I’m a bit of a newbie and also don’t have bundles of cash so thought I’d look on eBay - and there are loads of replacement sets. However, this part seems pretty important, I don’t mind a pattern part but need to know who to trust - I don’t want to buy from one of the many out there on eBay and then the part just snaps. Any advice?

Many thanks
Mark

 

Nodge68

Well-Known Member

• Apr 26, 2018

• #2

Buy OE or LR if you want them to last. There are also 3 mounts, not 2.

 

Arctic2

Well-Known Member

• Apr 26, 2018

• #3

Replace them with poly bushes and you should never need to change them again.

 

jedi

Well-Known Member

• Apr 26, 2018

• #4

+1 for the poly bushes I got sick n tired of changing mine.

 

wesky77

Member

• Apr 26, 2018

• #5

jedi said:

+1 for the poly bushes I got sick n tired of changing mine.

Click to expand...

Great thanks for the tip - if you could point me in the right direction to where and what I should buy that would be awesome. This is all new to me.

Thanks

 

Madmustang

Well-Known Member

• Apr 26, 2018

• #6

wesky77 said:

Great thanks for the tip - if you could point me in the right direction to where and what I should buy that would be awesome. This is all new to me.

Thanks

Click to expand...

Something like this
https://www.ebay.co.uk/itm/LANDROVE...137195?hash=item4b3ffdaeeb:g:LjQAAOSw14xXEWbo

 

Arctic2

Well-Known Member

• Apr 26, 2018

• #7

wesky77 said:

Great thanks for the tip - if you could point me in the right direction to where and what I should buy that would be awesome. This is all new to me.

Thanks

Click to expand...

No problem I used duraflex Red but the colour is your own choice from yellow, red, black,
https://www.ebay.co.uk/itm/Land-Rov...lander&hash=item3ab6aec329:g:HqEAAOSwQItUEand

https://www.ebay.co.uk/itm/Land-Rov...409317&hash=item3ab988e07a:g:ZNcAAOSwEK9T0ljn

https://www.ebay.co.uk/itm/Land-Rov...847192?hash=item3d09f1cf18:g:F08AAOSwnDZT0laJ

Combine that with the front lower engine mount and you should be ok for the future not changing them every couple of years.

 

Attachments

• 
  SDC14886 (2).JPG

  295.1 KB · Views: 268
• 
  SDC14897 (2).JPG

  156.1 KB · Views: 236
• 
  SDC14898 (2).JPG

  326.6 KB · Views: 228
• 
  SDC14899 (2).JPG

  313 KB · Views: 257

O

Old diver

Well-Known Member

• Apr 29, 2018

• #8

Is it possible to get poly bushes that are already fitted to the aluminium part?

 

Arctic2

Well-Known Member

• Apr 29, 2018

• #9

Old diver said:

Is it possible to get poly bushes that are already fitted to the aluminium part?

Click to expand...

I doubt it I have never seen any, it only takes about 5 minutes to remove the old bushes and insert the poly ones, overall it should take no longer than an hour to do all three mounts

 

O

Old diver

Well-Known Member

• Apr 29, 2018

• #10

Mmm I have looked at the pics, but I can't see how that g clamp is doing anything? How do you push the poly bushes into the bracket?

 

Arctic2

Well-Known Member

• Apr 29, 2018

• #11

Old diver said:

Mmm I have looked at the pics, but I can't see how that g clamp is doing anything? How do you push the poly bushes into the bracket?

Click to expand...

They come to you in two halves them you press them together through the mount once you have cut out the old bush

 

Attachments

• 
  SDC14895.JPG

  266.6 KB · Views: 272
• 
  SDC14896.JPG

  338.1 KB · Views: 209

O

Old diver

Well-Known Member

• Apr 29, 2018

• #12

Many thanks for the explanation and your patience. Just going to order some.

 

wesky77

Member

• May 8, 2018

• #13

Thanks for all your help guys, parts purchased - being fitted tomorrow!