JamesBB
Active Member
I was hoping somebody could have replied to your query because I cannot.
Best email Dave at Mid-Ulster Rotating Electrics Ltd if you know the make you have.....
Best email Dave at Mid-Ulster Rotating Electrics Ltd if you know the make you have.....
Tenebreaux
Well-Known Member
I'll be over near Cookstown on Monday, might pop in if I get time.
Don't know, is the answer. Mine was for the BMW as it was cheaper than Land Rover. Not sure of the make. When i got the new regulator it said suitable for BMW,VW,Audi and Peugeot, think. No mention of Ford. @tomcat59alan might know. Or @Dopey or @Datatek.
tomcat59alan
Well-Known Member
Do a search 14.7 voltage regulator by me
Brian has reposted it about a dozen times too.
brianp38dse
Well-Known Member
This is the one for the dozzel
https://www.ebay.co.uk/itm/Alternat...681762?hash=item5207c53062:g:xoYAAOSwHZBelHGJ
https://www.ebay.co.uk/itm/Alternat...681762?hash=item5207c53062:g:xoYAAOSwHZBelHGJ
JamesBB
Active Member
Just a quick update on my situation. Partly for the sake of an update, partly as I noticed my post count is 666 
and so I thought it best not to leave it there too long.
My voltage measured at the battery terminals @ 2000 rpm is 13.8V and slowly rises to 13.9V.but does not go above.
I have not fitted the VR/Diode pack yet as its been pi55ing down for near a week.
I wondering when I fitted my current battery and so I was searching through my old posts and found this: https://www.landyzone.co.uk/land-rover/battery.248871/page-2
That produced 2 interesting points:
It's probably best to wait and see how things behave after changing the VR/Diode pack then prep to order new, however again what kind of life do you guys get out of your batteries?
Cheers
and so I thought it best not to leave it there too long. My voltage measured at the battery terminals @ 2000 rpm is 13.8V and slowly rises to 13.9V.but does not go above.
I have not fitted the VR/Diode pack yet as its been pi55ing down for near a week.
I wondering when I fitted my current battery and so I was searching through my old posts and found this: https://www.landyzone.co.uk/land-rover/battery.248871/page-2
That produced 2 interesting points:
- The voltage is no different then than it is now (I did not change the VR/Diode pack back then- probably as the issue went away).
- The Alphaline battery I fitted over 6.5 years ago, which to me seems to have lasted a very long time. What kind of life do you guys get out of your batteries?
It's probably best to wait and see how things behave after changing the VR/Diode pack then prep to order new, however again what kind of life do you guys get out of your batteries?
Cheers
JamesBB
Active Member
News, it's fitted. The VR, no new diode pack installed. Just cleaned up slip rings and in general.
Instantly 14.2V rising to 14.5v and just at idle, not at 2K and not tested on load with headlights. I was already impressed enough at the increase in volts.
PLUS, my "alternator fault" message has gone.
Great news. Thanks for the tips and link to Mid-Ulster Rotating Electrics Ltd, they have been excellent with speedy service, support, and overall component quality.
Cheers
Instantly 14.2V rising to 14.5v and just at idle, not at 2K and not tested on load with headlights. I was already impressed enough at the increase in volts.
PLUS, my "alternator fault" message has gone.
Great news. Thanks for the tips and link to Mid-Ulster Rotating Electrics Ltd, they have been excellent with speedy service, support, and overall component quality.
Cheers
Tenebreaux
Well-Known Member
Just ordered a new VR, belt, AC belt and water pump. Now all I need is a dry weekend.
