B

boggy

New Member

• Oct 11, 2009

• #1

hi guys,got a small problem with my remote,it will unlock ok,but it does not lock it,i have to do it with key,i know its a small one compared with what some of you have,but i have had some monsters in the past.Believe me,so if you have ne ideas.
Regards to you all

 

G

gavbriggs

Well-Known Member

• Oct 11, 2009

• #2

re sync the remote with the car (search for procedure)

 

B

boggy

New Member

• Oct 11, 2009

• #3

just been outside and tried it,still nl go,thanks for replyin mate.

 

Datatek

Well-Known Member

• Oct 12, 2009

• #4

boggy said:

hi guys,got a small problem with my remote,it will unlock ok,but it does not lock it,i have to do it with key,i know its a small one compared with what some of you have,but i have had some monsters in the past.Believe me,so if you have ne ideas.
Regards to you all

Click to expand...

When you press the lock button on the remote, does the red LED light? If not could just be a dodgy button on the remote. Have you tried the key 2 remote to see if that is the same??

 

P38 DUB

New Member

• Oct 12, 2009

• #5

Mines a bit dodgy some times i have to get really close to the car. im going to try the batteries.

Have you tried one of those fob kits off fleabay. new batts &buttons and seals.

Anyone else tried these??

 

mmaddock

New Member

• Oct 12, 2009

• #6

gavbriggs said:

re sync the remote with the car (search for procedure)

Click to expand...

Procedure seems to vary between years. On mine at least I found that I have to use the key in the ignition then lock and open the doors from the drivers side with the key before it successfully re-syncs, which is not the procedure I found! Although if your fob locks the doors, then I don't think it will be a sync problem as in my experience the fob does nothing at all when it isn't synched.

The aerial is in the drivers side rear most window area, so try using it next to that window and it will be a reasonable indication of if the batteries are dying or not. When changing the batteries, if you don't manage it within a minute then you've got to resync the fob again!

Matt

 

G

gavbriggs

Well-Known Member

• Oct 12, 2009

• #7

if the sync fails, strip the lock mech down, twiddle the bits inside, clean the contacts on the multiplug. re grease ans put it all back together

 

B

boggy

New Member

• Oct 12, 2009

• #8

thx guys,got it sussed,the fobs come apart inside,ordered a new one,120 quid,o well no more trouble with that side of it.i hope.