Few piccys of one we built earlier [emoji106][emoji12][emoji12]
5989e1bffa7f3c4023e1d7c8245cf067.jpg
4581a7a858a65673210199cb6b7cfb4d.jpg
e37282356efc70bd702785c87b111936.jpg
 
Few gearbox piccys none of it apart but sum of being painted [emoji106]
e632c01e05cad5d9948cdac86209cd16.jpg
9ffdcabd34ed58eaa6d2189b568cddcf.jpg
3c903f2b1c4e4676c9fb8fea0b4aacac.jpg
d951c5a8db47ea5f724682dc43c9a3c3.jpg
6dd46967f0ff0d6684badeb51ba28ab4.jpg
1b7bc77c090d65d4bfbeb1ecb15a1359.jpg
a78bd60012065f1dfc596f2443e0debd.jpg
b096dd30d3670953d7f2b33b823da413.jpg
3b18ab3573cafc61280f9e6f6f6a6cc1.jpg
6d6ced30360b6f3da52ef4b0fd0c98db.jpg
transfer box next week got a disco auto one for better ratios [emoji106][emoji12]
 
Ta mick [emoji106]prep is wire brush on a drill then brake cleaner to wash and degrease it then a spray etch primer followed by silver paint then lacquer the red is engine paint left over from painting the engine [emoji106][emoji41]
 
Unclefester [emoji12]yep that's the one u want to buy it [emoji383][emoji383][emoji383][emoji383]
 
Thanx [emoji106][emoji41] good luck with yours and remember we all like piccys [emoji12][emoji12]
 
picked up my tdci bulkhead this week of a latish 12 plate rolled fender it was listed as damaged but measures up ok its complete in as much as the clutch pedal has been robed and also some switches and dash binnacle ,has a small amount of rust on the brackets that fasten inner wheel arch to foot well so going to strip to bare and remove said brackets treat rust paint and the re fit brackets and re use tdci dash but make my own clock inset will get piccys on later ,,,slow progress of late still waiting to fit eng and box :(
 
Every update is so much better than the Last! I can't believe how clean that gearbox n transfer box is....
 
thanx robbie, box n engine are getting covered in dust sat on the garage floor waiting for my mates to give me a lift in with them when all our schedules line up ,,lol
 

Similar threads