Yeah....it's not bad
This ones pretty good too Linky to Milli
Click on the pictures to enlarge them and get the full effect!
This ones pretty good too Linky to Milli
Click on the pictures to enlarge them and get the full effect! 
aaronmorris
Head's a shed
Why the sad face Mr Gatso? Progress or no progress?
Lawson86
Active Member
Been slowly reading through this thread over the past few weeks and wow your work is fantastic, the attention to detail is second to none! well done. Hopefully I can get mine somewhere close to this when time and funds permit! Have you got any further since the last update?
Many have come to the same conclusion.
thanx guys ,,,,,,,boost needed ,so thanx again ,,bulkhead is on and has had 3 tins of wurth stuffed in her even managed to get wurth coming from between the skins in the foot wells ,,happy days ,brake pedal box in place so i can make brake pipes ,then to route the wiring harness ,,,,,to mount the fuse box from the centrer to under steering column as you are aware the tdci bulkhead heater air control unit is in the centre ,already made a temp gear selector to move the r380 gear selector 110mm back and have sorted a cable operated hi/lo dif lock modified from disco 2 ,,so slowly slowly catchy monkey ,,,,,,,
well bugger all done really, bulkhead as I've said is painted and fitted pedals on and clutch bled hoping to swap her into the bigger garage over xmas on a good note she has been in this current garage for 11 months so thought, well better see if she will run ready for the big move so charged battery up put it on, jerry rigged solenoids 10 seconds of cranking and no heater plugs has they arnt wired yet boom sprang into life and ran like a goodun ,,,,,,happy days
so charged battery up put it on, jerry rigged solenoids 10 seconds of cranking and no heater plugs has they arnt wired yet boom sprang into life and ran like a goodun ,,,,,,happy days well,,,,,,,,,,,,,,small yet big update !!!!!!!!!!! she moves ,,lol drove her for the first time today well say drove moved her from one garage to one 3 doors down only had idle cos accelerator not connected ,,and no reverse,, the selector I've made so as to be able to fit tdci bulkhead and still use r380 gearbox needs adjustment but knew that anyway so now have room to build ,,, on a small note the clutch master cylinder would not bleed turned out being stood is no good even for twr new parts lol,
