H

honolulujoe

Well-Known Member

• Apr 11, 2017

• #1

after a gravity fed gun that does a good job for a reasonable price for diy spraying - not 2 pack obviously - say capable of doing up to a lwb series.

just binned the cheap crappy Clarke one I bought a few tears ago and never used till now.

any recommendations please chaps?

my compressor is 14.5 cfm 8bar

 

Bobsticle

De Villes Advocaat

• Apr 11, 2017

• #2

A good gun needs 3hp
A diy will cope with 2hp
A rag on a stick needs nowt.

 

H

honolulujoe

Well-Known Member

• Apr 11, 2017

• #3

yes I am getting above myself believing I have soared above the rag with the stick


iirc the compressor is 3hp

 

N

notenoughtime

Active Member

• Apr 12, 2017

• #4

I have a Sata bought second hand but was boxed cost me £150, also have a devilbliss but that was £350

 

Ash2304

Active Member

• Apr 12, 2017

• #5

Look for a second hand devilbiss/sata/iwata. Or if your budget can stretch to a new one then even better. You usually get a couple of fluid tip sizes with a newer one. A 1.2 and 1.3 should see you right for any paint/primer/lacquer. A lad at work has had his devilbiss gti for around 15 years or so and it still sprays like new.

 

N

notenoughtime

Active Member

• Apr 12, 2017

• #6

Primer you should be at 1.7 really

1.2-1.3-1.4

Water, base, lacquer

 

Ash2304

Active Member

• Apr 12, 2017

• #7

notenoughtime said:

Primer you should be at 1.7 really

1.2-1.3-1.4

Water, base, lacquer

Click to expand...

1.3 with lacquer was too much with the new guns we got. 1.2 does base, clear and wet on wet perfectly in our two guns. High build has a separate gun with bigger tip.


Edit: completely down to personal preference and the product being used. But we've found two good all round guns with GTIs

I would aim for a reputable brand and look for a second hand one on eBay or something. You can always buy spare parts and seals aswell if anything needs replacing

 

Last edited: Apr 12, 2017

Bobsticle

De Villes Advocaat

• Apr 13, 2017

• #8

honolulujoe said:

yes I am getting above myself believing I have soared above the rag with the stick


iirc the compressor is 3hp

Click to expand...

If like me you require a fine finish throw hands full of grit at it before the paint goes off. Pebble dash is the future...............

 

H

honolulujoe

Well-Known Member

• Apr 13, 2017

• #9

thx for the replies, buying a used one hadn't occurred to me, will have a look on the bay.

I knew of devilbiss' reputation but that's a bit too much for me to lash out on something that will get occasional use.

saw a vid on u tube of a chap using 1.4 for putty primer but he thinned it out iirc.

see if I can find a sata