W

wir hunter

New Member

• Dec 31, 2010

• #1

Hi,
When rear wiper is activated at stalk, it moves about 1/4 way down window then stops, only way to get it back is leave switched on at stalk and go to rear and manually help it back, it will do the 2 turns on window but needs help at same place each time, then need to run and switch off before it starts next cycle.
Any ideas ???
Cheers.

 

Datatek

Well-Known Member

• Dec 31, 2010

• #2

Loose on the splines? Try tightening the retaining nut.

 

W

wir hunter

New Member

• Jan 7, 2011

• #3

Retaining nut is tight, but when i select reverse gear and front wiper is on the rear wiper works perfect, could this be a fault with car computer?

 

R

Ridesafe

New Member

• Jan 7, 2011

• #4

wir hunter said:

Retaining nut is tight, but when i select reverse gear and front wiper is on the rear wiper works perfect, could this be a fault with car computer?

Click to expand...

Not always; if you're lucky might just be fusebox..........try that first! If that doesn't cure it then prolly BeCM

 

v8hotrodboy

Active Member

• Jan 7, 2011

• #5

Ridesafe said:

Not always; if you're lucky might just be fusebox..........try that first! If that doesn't cure it then prolly BeCM

Click to expand...

I agree could be engine bay fuse box.