pete12345

Well-Known Member

Full Member

• May 18, 2020

• #41

Well you av got a lot more faith in your work than I have in mine there's know way on this gods earth I would get in a plane I had built just told the missus the story of these bushes and making tools she wouldn't even get in the car I've I built the tools let alone a plane she still be laughing in an hour

 

wammers

No longer with us, RIP

Donater

• May 18, 2020

• #42

pete12345 said:

Well you av got a lot more faith in your work than I have in mine there's know way on this gods earth I would get in a plane I had built just told the missus the story of these bushes and making tools she wouldn't even get in the car I've I built the tools let alone a plane she still be laughing in an hour

Click to expand...

Some can, some can't, that's life.

 

pete12345

Well-Known Member

Full Member

• May 22, 2020

• #43

Can anyone tell me the part number for the nut that goes on the long bolt in the chassis on the front of the rear radius arm and also should you replace the bolt aswell as the nut thanks

 

C

Carljh

Member

• May 22, 2020

• #44

the nut is ANR3140 and the big long bolt is ANR6920 available at Rimmerbros, RAVE doesn't say you need to use a new bolt, just the usual don't tighten fully till its all back together on the ground.

 

pete12345

Well-Known Member

Full Member

• May 22, 2020

• #45

Cheers for that

 

pete12345

Well-Known Member

Full Member

• May 22, 2020

• #46

My bloke up garage managed to get bushes in hooray one side down one to go

 

Attachments

• 
  IMG_0598.JPG

  553 KB · Views: 134

pete12345

Well-Known Member

Full Member

• May 22, 2020

• #47

Next problem the rear bolts don't line up the axle has moved round a bit what's the best way of moving it back just jacking it trial and error

 

pete12345

Well-Known Member

Full Member

• May 22, 2020

• #48

Sorted I think ratchet & strap

 

pete12345

Well-Known Member

Full Member

• May 23, 2020

• #49

One side back on next week take off near side are you supposed to torque them up once wheels are on and back on the ground

 

R

romanrob

Well-Known Member

• May 24, 2020

• #50

I would do, at std ride height (which is more or less mid range), tho Rave suggests you torque before removing the axle stands ie wheels off, but the suspension's still loaded

 

pete12345

Well-Known Member

Full Member

• May 24, 2020

• #51

Ok cheers long way off that yet but just checking