mikerajjers

Well-Known Member
I've narrowed down my vibration to the rear drive train. I think it's the prop despite it being changed recently.

Should the motion of turning the yoke be perfectly smooth when removed? It feels like there is a 'bump' in the bearings as I twist them...i.e. not smooth. I had the props fitted and have no idea whether the mechanic greased the bearings.

Regarding the rear diff, is it normal for there to be some movement/wobble up and down/ side to side? also the flange rotates about 10-20 degrees. is this normal?

cheers


diff.png
 
only rotation at the diff flange any play needs sorting asap,and prop uj sounds very poor should be smooth
 
  • Like
Reactions: 8ha
no different rear diffs ,it would be 24 spline diff from 94 on, oem is better than pattern from any of the wholesalers
 
the pin is sheared in the rear diff. I´ll get it reconditioned and if it happens again I´ll buy a four pin diff from ashcroft
 

Similar threads