Crazydave1967
Member
Sorry for the delay yes all the same
Crazydave1967
Member
Cheers my man will get new one put on
Cheers will get new one at weekend
Crazydave1967
Member
Cheers for your reply
jamesmartin
Well-Known Member
unbolt them and swap them over unless a bush is worn
Crazydave1967
Member
Will try that first. But the bottom Bush looks knackered. Cheers
1988smithy
Well-Known Member
If bushes are worn, I fitted this to mine.
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/132697907258
Everything's there for centre pivot and both link arms.
Seems expensive until you see how much genuine ones are. I took the linkage off myself, had old pressed out and these pressed in by local garage for £30, job jobbed
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/132697907258
Everything's there for centre pivot and both link arms.
Seems expensive until you see how much genuine ones are. I took the linkage off myself, had old pressed out and these pressed in by local garage for £30, job jobbed
Crazydave1967
Member
Sounds a plan to me .I have access to a press so will give it a go ..cheers my man
Crazydave1967
Member
Will post pictures tomorrow
Cause off for some shut eye up for work 1
30 am cheers everyone chat tomorrow
Cause off for some shut eye up for work 1
30 am cheers everyone chat tomorrow
Crazydave1967
Member
Hi everyone
Just a update on rear axle
All done and dusted .the watts linkage had been put on wrong way..all taken apart and put on right way..wheels are back under the arches ..just want to thank you all for you replys. Cheers people
Just a update on rear axle
All done and dusted .the watts linkage had been put on wrong way..all taken apart and put on right way..wheels are back under the arches ..just want to thank you all for you replys. Cheers people
