Bison
Active Member
Hi all
My Range Rover P38 (X) 2000. 4.6L V8 Petrol/LPG has started misfiring again! Last time it was an inlet manifold gasket with no fault codes to help! Luckily or not it has given me a fault code this time and it is as follows
P1319
P1319 Land Rover Misfire with Low/Empty FuelDrive cycle C:Signal out of range - above maximum
I can obviously read what it sais and I have looked at all the other posts with this P1319 reference but what does it mean.
Can anyone give me some detail on this unhelpful explanation for Fault Code P1319?
Thus far I have changed my plugs.
Compression tested all cyinders - all at 12 Bar
HT Leads giving a pulse but unable to test how strong.
Plenty of fuel in my tank!
Once again guys I value your input so thank you in advance for your contribution.
Cheers
Bison
My Range Rover P38 (X) 2000. 4.6L V8 Petrol/LPG has started misfiring again! Last time it was an inlet manifold gasket with no fault codes to help! Luckily or not it has given me a fault code this time and it is as follows
P1319
P1319 Land Rover Misfire with Low/Empty FuelDrive cycle C:Signal out of range - above maximum
I can obviously read what it sais and I have looked at all the other posts with this P1319 reference but what does it mean.
Can anyone give me some detail on this unhelpful explanation for Fault Code P1319?
Thus far I have changed my plugs.
Compression tested all cyinders - all at 12 Bar
HT Leads giving a pulse but unable to test how strong.
Plenty of fuel in my tank!
Once again guys I value your input so thank you in advance for your contribution.
Cheers
Bison