T

teddykan

New Member
Hi everyone,
I'm buying my first ever 4x4 and chose the Range Rover. The Discovery comes second choice but the Range Rover Classic that's been sitting derelict at my local friendly garage came up for grabs.

Steve the proprietor tells me that for the MoT today, as long as the body doesn't move appreciably from the chassis when you rock the lot, it'd pass the MoT. The crucial areas for this are the body mounts, but the mounting arrangement is so sturdy you could get away with it with one set of rotten mounts. I'll post pictures of the rot here later. I plan to weld repair it myself, having cut my teeth welding up 1980s Jaguars which rot similarly.

More to come...
terra
teddykan
Glos
Range Rover Classic
Jaguar XJ-S
Daimler Double Six
Vauxhall Combo
Lots of non-roadworthy junk
 
Yes the last MoT was 2008 and it failed on rust. Steve claims that the MoT rules have been updated since and they allow a wider margin for rust as long as the bodywork doesn't move much relative to the chassis.

Never mind all that MoT bollox. I plan to repair the rust and do her up to scratch.

teddykan
 
teddykan said:
Yes the last MoT was 2008 and it failed on rust. Steve claims that the MoT rules have been updated since and they allow a wider margin for rust as long as the bodywork doesn't move much relative to the chassis.

Never mind all that MoT bollox. I plan to repair the rust and do her up to scratch.

teddykan
Click to expand...

steve sounds a bit of a tool to me, any rust holes within a certain distance of any body mounts will fail an MOT, something like 8 inches??
 
Here's my first (and likely my only) 4x4. I've finally bought her from Steve of Allen & Elliots in Slimbridge, Glos. Steve was sad to see her go but also knows that he'll never get round to fixing her up.

"This is a real classic you know! It's one of the first diesels that came out." Steve reminded me time and time again. I just nodded.

"You won't miss her - I'll bring her back here for you to repair and maintain her." I said. I'm a loyal customer to his garage.

The main areas of welding repairs are shown in the pictures. I've not yet got pictures of the rotten rear cross member but I shall see how I'll tackle these areas.

Terra
teddykan
 

Attachments

  • (1).JPG
    (1).JPG
    125.3 KB · Views: 207
  • (10).JPG
    (10).JPG
    113.9 KB · Views: 152
  • (9).JPG
    (9).JPG
    86.2 KB · Views: 172
  • (8).JPG
    (8).JPG
    94.3 KB · Views: 162
  • (7).JPG
    (7).JPG
    76.1 KB · Views: 194
  • (6).JPG
    (6).JPG
    158.7 KB · Views: 170
  • (5).JPG
    (5).JPG
    106.1 KB · Views: 198
  • (4).JPG
    (4).JPG
    103.5 KB · Views: 182
  • (3).JPG
    (3).JPG
    110 KB · Views: 180
  • (2).JPG
    (2).JPG
    101 KB · Views: 162
A few more pics of what I was up to

Terra
teddykan
 

Attachments

  • (11).JPG
    (11).JPG
    116 KB · Views: 142
  • (12).JPG
    (12).JPG
    101.1 KB · Views: 141
  • (13).JPG
    (13).JPG
    126.3 KB · Views: 153
oh you nasty nasty men,methinks he has gone and sat in the corner and is having a good cry at what STEVE has sold him.a pup comes to mind.:hysterically_laughi:behindsofa:
 
ha ha ha pmsl...you are gunna swear.i might have a-pillar repair sections here somewhere may look later...

ha ha ha ha ha

welcome to the world of rust...ha ha ha h pmsl alot.
 
You must log in or register to reply here.

Similar threads

F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
Jon308
6x6 Range rover/double cab defender build
Replies
3
Views
2K
hef19898
hef19898
MJI
Range Rover
Replies
0
Views
517
MJI
MJI
landygirl87
Updated on my Range Rover LSE
Replies
4
Views
961
gold rover
gold rover
landygirl87
Updated on my Range Rover LSE
Replies
0
Views
346
landygirl87
landygirl87