madbrit

Active Member

• Nov 13, 2020

• #1

I have a 4.0 p38 with the Standard radio, I want to put a new radio in but does anyone do a converter plug kit, my radio has loads of plugs, would like to keep the volume and station changer on the steering wheel if possible.

Any body recommend a radio ?

THanks

MsDbrIT

 

kermit_rr

Very

Full Member

• Nov 13, 2020

• #2

the p38 radio offers a pre-amp signal, to replace without rewiring, you'll need a radio that has pre-out

 

madbrit

Active Member

• Nov 13, 2020

• #3

ok thank you, so i need one with a pre amp and a conversion plug set

 

kermit_rr

Very

Full Member

• Nov 13, 2020

• #4

thats my understanding. pre-out front and rear, and pre-out to the sub too if you have one

 

brianp38dse

Well-Known Member

• Nov 13, 2020

• #5

Some of the peeps on here have fitted android units, there have been a few threads about it, have search,

 

Mark Piercy

Well fumbled member....

Full Member

• Nov 13, 2020

• #6

I had Kenwood that worked with an adapter but the new jvc.. Same thing but with Bluetooth needed to have an adapter.

 

Mark Piercy

Well fumbled member....

Full Member

• Nov 13, 2020

• #7

https://incartec.co.uk/product/Range-Rover-P38-95-99--Steering-interface got it from these after an email with some details.

 

biketeacherdave

Well-Known Member

• Nov 13, 2020

• #8

Fit an android I did it loads better have a search

 

K

kds

Well-Known Member

• Nov 13, 2020

• #9

No radio buttons on steering wheel of p38 I had but then it was only a dse.