ciderman

Active Member

• Dec 4, 2011

• #1

Hi
what prop goes from a stage one front axle to a LT77 fitted to a perkins 4236?
standard defender or 90-? mine has a lot of play.....
length is 720mm.

 

pobby

New Member

• Dec 5, 2011

• #2

It would depend on where the flanges have ended up ?
Has it got the standard series transfer box or the lt77 transfer
This will dictate the distance between the did flange and the gearbox flange then you can work out what prop

 

ciderman

Active Member

• Dec 8, 2011

• #3

ah, that is a question, i don't know. how do i tell the difference, i have a series 3 one under the bench, so what differences do i look for?
yrs

 

jamesmartin

Well-Known Member

• Dec 8, 2011

• #4

length as the diff flanges are all the same

 

ciderman

Active Member

• Dec 8, 2011

• #5

OK, don't know if i want to go and look now its blowing a gale or two!

 

blue beasty

Leaks an prone to bits dropping off

• Dec 8, 2011

• #6

4236........is that the 3.3? if so I've got a new water pump you can have.....not that it helps with your prop issue :doh: