S SDA Member Feb 9, 2012 #1 just another annoying problem guys, can anyone tell me how to make hazard lights to flash when arming alarm, can it be programmed separately.
just another annoying problem guys, can anyone tell me how to make hazard lights to flash when arming alarm, can it be programmed separately.
lowfat Active Member Feb 9, 2012 #2 Its A BECM function on the p38. You can select side lights or indicators.
dogsbody Very senior member Feb 10, 2012 #3 lowfat said: Its A BECM function on the p38. You can select side lights or indicators. Click to expand... With a Testbook, big Faultmate, maybe the new Nanocom - you get the idea.
lowfat said: Its A BECM function on the p38. You can select side lights or indicators. Click to expand... With a Testbook, big Faultmate, maybe the new Nanocom - you get the idea.
wammers No longer with us, RIP Donater Feb 10, 2012 #4 dogsbody said: With a Testbook, big Faultmate, maybe the new Nanocom - you get the idea. Click to expand... Nanocom will do that.
dogsbody said: With a Testbook, big Faultmate, maybe the new Nanocom - you get the idea. Click to expand... Nanocom will do that.
hippolover New Member Feb 10, 2012 #5 Mine don't flash on locking/unlocking. I know there is a programme to reset it to either sidelights or indicators however my local 'specialist' can't manage it and says there must a fault in the BECM. £60 please sir to tell me that.
Mine don't flash on locking/unlocking. I know there is a programme to reset it to either sidelights or indicators however my local 'specialist' can't manage it and says there must a fault in the BECM. £60 please sir to tell me that.
dougdotcom Active Member Feb 10, 2012 #6 It could be the Alarm has been dissabled then nothing will flash, if not the settings have jumped to side lights in the Becm.
It could be the Alarm has been dissabled then nothing will flash, if not the settings have jumped to side lights in the Becm.