Jonny Dub

New Member
As the subject says, pulling the indicator stalk (i.e. the one with the dip/high beam controller) to flash the headlights is difficult to do without switching on the high beams. I had a similar problem in a VW which I solved by replacing the entire stalk. I think the underlying problem was a burnt out or otherwise defective switch which formed part of the stalk.

Given that I'm still new to this Rangie (a 98 P38 DSE), has anyone had any similar problems and/or suggestions for a remedy. I'm thinking about getting a new stalk, but would weclome any thoughts before diving in headlong! For info, I've seen other posts about replacing switches located away from the stalk, however this current issue seems to be more of a "physical" switch problem rather than an electrical defect somewhere else down the chain.

Many thanks

Jonny
 
I had the same problem with my 1990 RR and had to replace the complete stalk. See if you can get one on E-Bay as I think the cost of a new one is rather high.
 
I have the opposite problem, I keep flashing the headlights when I want to switch to main beam!!

As I understand it, problems with the headlight stalk are common on the P38.

Matt.
 

Similar threads