i hate my P38
Member
Hi,
I'm a Novice green laner running a 110 csw
I was given a set of 4' britpart springs and pro comp shocks for free from my friend who owns a garage, they were bought for another customer who didnt like the height so had them remove.
Since fitting them to my landy i have noticed that the anti roll bar is twisted. the left side sits in the up position, almost touchng the spring, whilst the right hand side is at 90 deg to the axle, there does not appear to be any handling problems, but she sits slightly higher on the passenger side.
so.....what i would like to know is wether the increase spring/shock size has caused this, if so what can i do to rectify this problem.
Also do i need to fit dislocation cones or anything else to the steering/suspension to allow for the increased height.
I have no other modifications on the landy apart from the above mentioned!
I recently went on the wayfarer with friends, could i have damaged the roll bar by catching it on rocks?
I can put up a few pics if you guys would like to see what i have described.
Any help would be greatly appreciated.
thanks
I'm a Novice green laner running a 110 csw
I was given a set of 4' britpart springs and pro comp shocks for free from my friend who owns a garage, they were bought for another customer who didnt like the height so had them remove.
Since fitting them to my landy i have noticed that the anti roll bar is twisted. the left side sits in the up position, almost touchng the spring, whilst the right hand side is at 90 deg to the axle, there does not appear to be any handling problems, but she sits slightly higher on the passenger side.
so.....what i would like to know is wether the increase spring/shock size has caused this, if so what can i do to rectify this problem.
Also do i need to fit dislocation cones or anything else to the steering/suspension to allow for the increased height.
I have no other modifications on the landy apart from the above mentioned!
I recently went on the wayfarer with friends, could i have damaged the roll bar by catching it on rocks?
I can put up a few pics if you guys would like to see what i have described.
Any help would be greatly appreciated.
thanks