B

babyblade666

New Member

• Dec 25, 2010

• #21

I will try with a mini grinder/ polisher because the piston is still in the compressor because I am unable to unscrew the Alan key holding the piston crank against the centr shaft

 

c099895

New Member

• Dec 25, 2010

• #22

Babyblade...

have you taken the top of the cylinder off revealing the teflon /piston head? you can crank it round so the piston is protruding enough to get the end washer thingy off

 

B

babyblade666

New Member

• Dec 25, 2010

• #23

c099895 said:

Babyblade...

have you taken the top of the cylinder off revealing the teflon /piston head? you can crank it round so the piston is protruding enough to get the end washer thingy off

Click to expand...

Yes I have managed to pry open the washer ring that holds the seal whilst the piston is still attached with the compressor but I used a small thin screwdriver and typed the ring enuf so that I can remove all of the old seal

 

c099895

New Member

• Dec 25, 2010

• #24

good .. just take your time to clean it up.. make as clean as possible it will be fine