Flea bay it is then! Gonna buy walnut facia bits soon soon so I'll do it all together. Is it the same motor you can see when u remove the binnacle?
 
Look the same as the ones on ebay but unsure if the wire colours are the same
think I have to cut the wires cos aint that the one thats in a loom of 3?
 
Last edited:
Look the same as the ones on ebay but unsure if the wire colours are the same
think I have to cut the wires cos aint that the one thats in a loom of 3?

You can remove the wires for the motor you are changing from the plug with the proper tool. I was thinking of changing the lot at the same time so ignore that remark about facia. Cutting wires and joining them is an untidy option in my view but a lot do it. If you buy a motor with cut wires then it's your only option.
 
Look the same as the ones on ebay but unsure if the wire colours are the same
think I have to cut the wires cos aint that the one thats in a loom of 3?

They should be. On the replacement I had the colours were the same but some wires were a slightly different shade.
 
The bits im selling are not crap off my car they all work fine and are no longer needed, i only took my dash out as i had never done the o-rings before and i wanted to do the best job possible without cutting anything that i wasnt sure about !!
 

Similar threads