Plodwin589
New Member
I have a 300tdi I’ve done timing 3 times but still not running right It starts but pops and smokes whiteish blue smoke colour really bad on revs only advice plz
Not the best sub-forum maybe?
Is this a Fender? if so, put the question in the Defender forum where people with 300tdi experience can see it.
Plodwin589
New Member
It is a discovery
Disco or Defender makes no odds, timing is the same
How are you setting it? using what tools?
What made you touch it in the first place?
Plodwin589
New Member
We using timing tools the reason was the timing belt snapped it’s a discovery
Right so there is a back story that is good.
So I am assuming you have timing pin top and bottom and cam/casing arrows lined up? if so I reckon you need to do a compression test, then pop the rocker cover off and check valve gear, could be as simple as a lash cap missing, or maybe damaged rocker, if all appears okay then its head off time.
payydg
Well-Known Member
@Plodwin589 i agree with @lynall
if you’ve done the timing with the correct tools I’d back yourself to have done it correctly. It’s not a hard job.
What were the circumstances around the belt snapping? If you’ve not looked at the push rods, rockers, valves etc and you’re just changing the belt I guarantee your issue is elsewhere
if you’ve done the timing with the correct tools I’d back yourself to have done it correctly. It’s not a hard job.
What were the circumstances around the belt snapping? If you’ve not looked at the push rods, rockers, valves etc and you’re just changing the belt I guarantee your issue is elsewhere
If you've done nothing apart from reset the timing & fit a new belt you might want to have a read of this:
www.landyzone.co.uk/land-rover/300-tdi-snapped-cam-belt.79696/
www.landyzone.co.uk/land-rover/300-tdi-snapped-cam-belt.79696/
