autogas

New Member
Hi guys
on two occasions i have found this fault it may have been covered previously .

Engine starts sometimes difficult , then when trying to rev up its very un responsive and misfires the rev counter does a Missy fit .

Cause both times a broken tooth on the flywheel which passes the crank sensor . there is one gap for tdc but on both of the ones i had in there were two gaps hence two Top Dead Centres . worth a look

as you can imagine these are easy to snap or bend when offroading or a simple stone in wrong place

hope it helps someone
 

Attachments

  • flywheel.JPG
    flywheel.JPG
    67.4 KB · Views: 93

Similar threads