B

b15uun

New Member

• Aug 17, 2010

• #1

Trying to undo the bolts but no nut on the back of the bolts only whats seems to be a washer or sleeve which is just spinning with the bolts anyone got any suggestions??? PLEASE ( on the verge of getting out the sledge hammer how can something so simple be such a pain in the ass )

 

Datatek

Well-Known Member

• Aug 17, 2010

• #2

Cut the heads off the bolts and use nutserts or similar to put a new nut into the chassis to re-fit.

 

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Forum Sponsor

• Aug 17, 2010

• #3

would help if there was a location, I have a nutsert tool and can fit the steel inserts as well as alloy

 

B

b15uun

New Member

• Aug 17, 2010

• #4

fanatic said:

would help if there was a location, I have a nutsert tool and can fit the steel inserts as well as alloy

Click to expand...

Im in bristol mate.:doh:

 

B

b15uun

New Member

• Aug 17, 2010

• #5

Not to worry just jacked it up and took a hammer to it bent it back the right way an its working again lol :smash:

 

pandy7203

New Member

• Aug 17, 2010

• #6

b15uun said:

Not to worry just jacked it up and took a hammer to it bent it back the right way an its working again lol :smash:

Click to expand...

an angle grinder comes in handy wen u own a p38 i cut my off with one and replaced it with a new one and new nuts