j the range
New Member
easy to take off and paint it black looks much nicer, two screws at the top and just lifts out if i remember and you need to use a plastic primer on it befor paint..
Dave Herron
New Member
Dont forget the screws which are on the front of the grill about half way down at either side.
RangeRoverBreakers
New Member
4 screws at the top, 2 half way down grill then wiggle out from headlights.
on the grill subject..
what would the standard of been on a 96 dse ? mines a dark grey with chrome edges on the grilles ? is that an oem grille or should it be all plain black ?
could do with replacing to make mint although its ok, chromes a bit worn, what do people make of the newer style grilles on ebay ? like the super charged and sport look ones ?
what would the standard of been on a 96 dse ? mines a dark grey with chrome edges on the grilles ? is that an oem grille or should it be all plain black ?
could do with replacing to make mint although its ok, chromes a bit worn, what do people make of the newer style grilles on ebay ? like the super charged and sport look ones ?
cheers guys loads of info was gonna attempt it today but its peeing it down outside so may leave till weekend now yeah i do need to get some plastic primer but defo liking the sound of doing it black think it will look a hell of alot better then the mouldy grey look at the mo lol thanks for all your help
Mike
recently did mine (it was faded almost to a light grey) in Plastikote black. Didn't come out black but a really nice very dark grey that matched perfectly the colour of the bumper. I did the grill and the plastic bits below the headlights and, as long as you clean them properly before to get rid of old polish etc. you don't even need primer.
I'm well chuffed with mine and it looks factory - finish is really good too. Paint cost £8.99 a can (aerosol) from Halfrauds
recently did mine (it was faded almost to a light grey) in Plastikote black. Didn't come out black but a really nice very dark grey that matched perfectly the colour of the bumper. I did the grill and the plastic bits below the headlights and, as long as you clean them properly before to get rid of old polish etc. you don't even need primer.
I'm well chuffed with mine and it looks factory - finish is really good too. Paint cost £8.99 a can (aerosol) from Halfrauds
cool thats a good idea might do that as well cheers, ive just bought my primer now before reading your post lol well i can use the primer on the suede posts inside the car as ive just been srubbing all the manky stuff off all day yesterday so gonna use the black on the posts and buy that stuff you recommended for the grills cheers 
Yes quite correct bought some myself and it is the dogs bollocks. After doing grille and headlamp trims still have 3/4 of it left for all the other plastic bits. Parts need a VERY thorough cleaning with soap and Scotch bright. (Nylon pan scrubs) to the uninitiated. Then apply a couple or three coats waiting til last is dry and grille is back good as new. Super stuff and a lot better than paint. Can be used on all black plastic and door handles. But nobody seems to be listening.
forever black at motorgeek
£13 for a kit here with cleaning stuff included, is that a good deal ? can you buy it in any local/high street type places ? gonna give this a try
£13 for a kit here with cleaning stuff included, is that a good deal ? can you buy it in any local/high street type places ? gonna give this a try
discomalc
New Member
Wouldnt bother too much with the cleaning kit that comes with it, as wammers says hot soapy water and a scotch pad s just as good. Done my grille, handles etc a couple of months back and they still look good as new. Takes a few coats and i found using a small brush is easier than the sponge pad that comes with it
