J

jgreenwell

Member

• Sep 30, 2008

• #1

Hi all, just a couple of quick questions.

What diameter pipe do I need, 3.2mm?? Also is it just a case of pull off the old, push on the new pipes? Do they self bleed??

Kind regards
Jonathan

 

A

aj11r

New Member

• Sep 30, 2008

• #2

3.2mm if you can find them. I bought a reel from halfrauds including the blanking plugs they were 3mm but i didnt see the problem with a tighter fit,
You just need to cutt them to the appropriate length.
You will find cranking over your car once they have been fitted may take a few attempts before it'l start properly. ;-)

 

J

jgreenwell

Member

• Sep 30, 2008

• #3

aj11r said:

3.2mm if you can find them. I bought a reel from halfrauds including the blanking plugs they were 3mm but i didnt see the problem with a tighter fit,
You just need to cutt them to the appropriate length.
You will find cranking over your car once they have been fitted may take a few attempts before it'l start properly. ;-)

Click to expand...

Not really a major problem at the moment as she wont start anyway Plus I need to get around the problem of the imobiliser

 

C

Canyon

New Member

• Oct 2, 2008

• #4

you should bleed the fuel line on the fuel pump, just slack the nut off and crank the engine for 20 secs, tighten up and your done.