Hi all, just a couple of quick questions.

What diameter pipe do I need, 3.2mm?? Also is it just a case of pull off the old, push on the new pipes? Do they self bleed??

Kind regards
Jonathan
 
3.2mm if you can find them. I bought a reel from halfrauds including the blanking plugs they were 3mm but i didnt see the problem with a tighter fit,
You just need to cutt them to the appropriate length.
You will find cranking over your car once they have been fitted may take a few attempts before it'l start properly. ;-)
 
3.2mm if you can find them. I bought a reel from halfrauds including the blanking plugs they were 3mm but i didnt see the problem with a tighter fit,
You just need to cutt them to the appropriate length.
You will find cranking over your car once they have been fitted may take a few attempts before it'l start properly. ;-)
Not really a major problem at the moment as she wont start anyway :) Plus I need to get around the problem of the imobiliser:rolleyes:
 
you should bleed the fuel line on the fuel pump, just slack the nut off and crank the engine for 20 secs, tighten up and your done.
 

Similar threads