Vauxhall engine?
They had the egr with the alloy manifold and gaskets.
Our @RisforRacingnotReverse has pulled one off our old omega diesel to put on his 2000 38', he has all the holes drilled and tapped on his engines cyl head.
They had the egr with the alloy manifold and gaskets.
Our @RisforRacingnotReverse has pulled one off our old omega diesel to put on his 2000 38', he has all the holes drilled and tapped on his engines cyl head.
tomcat59alan
Well-Known Member
Could be or early aluminium inlet manifold engine, I take it was done to fit the plastic manifold.Vauxhall engine?
They had the egr with the alloy manifold and gaskets.
Our @RisforRacingnotReverse has pulled one off our old omega diesel to put on his 2000 38', he has all the holes drilled and tapped on his engines cyl head.
Good point, it's interesting to think that these cars have been around so far for at least 20yr. God knows what has gone on with some of them.
or in them....... tomcat59alan
Well-Known Member
Known a few wimin like that.Good point, it's interesting to think that these cars have been around so far for at least 20yr. God knows what has gone on with some of them.
tomcat59alan
Well-Known Member
Just, When I was 16 I swore I would never go out with a girl that was more than half my age.At least 20yr old?
Ooh, you weren't signed up for the Jimmy savelle juniors club...Just, When I was 16 I swore I would never go out with a girl that was more than half my age.
tomcat59alan
Well-Known Member
Nah, I fixed it for him and the Glitter man.Ooh, you weren't signed up for the Jimmy savelle juniors club...
As the question was ,what was 20stone and rode a nine times Derby winner, answer, Lester Piggott's cellmate.
Who is lester piglet?
tomcat59alan
Well-Known Member
Ate it for Sunday dinner,luverly bit of crackling.Who is lester piglet?
P38-DFX
P38 Enthusiast
I’m sure you’d be able to find one with the correct fitting and rating.
tomcat59alan
Well-Known Member
You can tell it's another boring bank holiday
Your right, while the dog is sleeping.. I'll let it. I do keep an eye out for improvements.
So far, I've been making a barn door for the barn at the end of the building and now I'm chatting with fellow landy bods. I might go and pull the door card off the bus as it's locking and then not locking with the remote.You can tell it's another boring bank holiday
tomcat59alan
Well-Known Member
Well I've taken down my 10x8 shed because a tree next to it has to come down as the trunk is half rotted through at the base. Would be the one that's leaning towards the nearest house. Bugger of a job on your own,
Think I'll go and pour myself a Guinness.
Pour me one as well. Well done mate.Well I've taken down my 10x8 shed because a tree next to it has to come down as the trunk is half rotted through at the base. Would be the one that's leaning towards the nearest house. Bugger of a job on your own,
tomcat59alan
Well-Known Member
I have done, think I'll have to drink it though it will be flat by the time you get here.Pour me one as well. Well done mate.
I'm in the garden..I have done, think I'll have to drink it though it will be flat by the time you get here.
ned_
Active Member
the P38 top hose needs a 34mm adapter and they can be found for peanuts online
I fitted an electric fan that operates from a switch like the one above. The fans that Revotec fit the the P38 are 10 amp, 15.2 inch Comex fans, I bought the 20 amp version and fitted that. It has a taller motor.
This is the 10 amp version that Revotec sell
And this is the 20 amp version that I fitted
Comex F30P12L8205HT08S
It has a few mm clearance from the crankshaft pulley, should be fine
I fitted an electric fan that operates from a switch like the one above. The fans that Revotec fit the the P38 are 10 amp, 15.2 inch Comex fans, I bought the 20 amp version and fitted that. It has a taller motor.
This is the 10 amp version that Revotec sell
And this is the 20 amp version that I fitted
Comex F30P12L8205HT08S
It has a few mm clearance from the crankshaft pulley, should be fine
Last edited:
There is a mod from Datatek that uses the aircon fans as well as the fan you've fitted. It cools the rad down in no time at all.
