Tornado chip.
Tornado chip.
RangeRoller dt
Well-Sprung Member
Know nothing about P38 ecu chips.
They hard to change?
Bet they not cheap. Power box holds its money. No chance of 2nd hand.
They hard to change?
Bet they not cheap. Power box holds its money. No chance of 2nd hand.
Perhaps mine is ok then, and is running normally for one of these then. Think I'm just looking back with rose colour specs at my Trooper Bighorn, as that definately was pokier......but then I guess it should have been being a 3.1 with manual box...
It is nice to drive now, but guess we all always want a little more from our cars?
With out blowing it up, how do you adjust the turbo? Not bothered about increasing top speed, (Despite my previous comments I don't spend all my life at 90mph+ , unless I'm on my bike, haha) but a bit more low down umph would be nice for the odd overtake, when possible, given the vast amounts of traffic around at all hours of the day and night now!
Grrrrrrr.. intercooler has been changed along with Turbo pipes, new MAP and pipe, FIP appears ok after I adjusted it properly. New lift pump, filter, air filter etc, I've been a busy boy
.
It is nice to drive now, but guess we all always want a little more from our cars?
With out blowing it up, how do you adjust the turbo? Not bothered about increasing top speed, (Despite my previous comments I don't spend all my life at 90mph+ , unless I'm on my bike, haha) but a bit more low down umph would be nice for the odd overtake, when possible, given the vast amounts of traffic around at all hours of the day and night now!
Grrrrrrr.. intercooler has been changed along with Turbo pipes, new MAP and pipe, FIP appears ok after I adjusted it properly. New lift pump, filter, air filter etc, I've been a busy boy
.
Perhaps mine is ok then, and is running normally for one of these then. Think I'm just looking back with rose colour specs at my Trooper Bighorn, as that definately was pokier......but then I guess it should have been being a 3.1 with manual box...
It is nice to drive now, but guess we all always want a little more from our cars?
With out blowing it up, how do you adjust the turbo? Not bothered about increasing top speed, (Despite my previous comments I don't spend all my life at 90mph+ , unless I'm on my bike, haha) but a bit more low down umph would be nice for the odd overtake, when possible, given the vast amounts of traffic around at all hours of the day and night now!
Grrrrrrr.. intercooler has been changed along with Turbo pipes, new MAP and pipe, FIP appears ok after I adjusted it properly. New lift pump, filter, air filter etc, I've been a busy boy
If it is running as it should I would leave the turbo well alone!
RangeRoller dt
Well-Sprung Member
They will shift, they are just
Not very responsive due to the weight.
Every little job I do makes it a little smoother and quicker. All the little bits add up
Not very responsive due to the weight.
Every little job I do makes it a little smoother and quicker. All the little bits add up
They will shift, they are just
Not very responsive due to the weight.
Every little job I do makes it a little smoother and quicker. All the little bits add up
I was towing last night, albeit with a smaller trailer and it didn't even notice it. No problem keeping up in traffic and I sure as hell wouldn't want to go any faster. So good for purpose.
RangeRoller dt
Well-Sprung Member
Yes the coils on mine compress with more weight and it seems to want to go more.
If it can carry its own weight the extra seems to make little difference.
By responsiveness I mean you have to boot it before the hill, too late once your already on it have to drop to 4th then
If it can carry its own weight the extra seems to make little difference.
By responsiveness I mean you have to boot it before the hill, too late once your already on it have to drop to 4th then
Datatek
Well-Known Member
Best advice is leave the turbo alone.Perhaps mine is ok then, and is running normally for one of these then. Think I'm just looking back with rose colour specs at my Trooper Bighorn, as that definately was pokier......but then I guess it should have been being a 3.1 with manual box...
It is nice to drive now, but guess we all always want a little more from our cars?
With out blowing it up, how do you adjust the turbo? Not bothered about increasing top speed, (Despite my previous comments I don't spend all my life at 90mph+ , unless I'm on my bike, haha) but a bit more low down umph would be nice for the odd overtake, when possible, given the vast amounts of traffic around at all hours of the day and night now!
Grrrrrrr.. intercooler has been changed along with Turbo pipes, new MAP and pipe, FIP appears ok after I adjusted it properly. New lift pump, filter, air filter etc, I've been a busy boy
Spoil sport
RangeRoller dt
Well-Sprung Member
I actually want to see what happens.
Remember to take pics of the debris
Turbos are not cheap, nor the bits it will take with it
Remember to take pics of the debris
Turbos are not cheap, nor the bits it will take with it
RangeRoller dt
Well-Sprung Member
Some people have fitted bigger Mercedes turbos to M51s. Big power gain but other mods are also required. It’s not just crank up pressure and away
Some people have fitted bigger Mercedes turbos to M51s. Big power gain but other mods are also required. It’s not just crank up pressure and away
Check stustrong's posts. You can tweak it maybe half a turn on a tired one and get away with it but I'd leave well alone.
I’m getting the distinct impression it wouldn’t be the best thing to do
Think I’ll leave it alone then, haha.
These guys are only 10 mins from me, so might keep it on mind for future.
https://www.jgs4x4.co.uk/range-rover-p38-2-5td-monster-tuning-remap-performance-engine-tune
First Job is sort the ABS...... new accumulator on its way.
Think I’ll leave it alone then, haha.
These guys are only 10 mins from me, so might keep it on mind for future.
https://www.jgs4x4.co.uk/range-rover-p38-2-5td-monster-tuning-remap-performance-engine-tune
First Job is sort the ABS...... new accumulator on its way.
RangeRoller dt
Well-Sprung Member
He says he got 18psi out of it!...
No wonder his P38 died within 5 months
Yeah, like I said, best leave well alone!
Datatek
Well-Known Member
The P38 diesel cooling system is marginal and the heads are fragile. Up the turbo pressure and enjoy it while it lasts which may not be very longI actually want to see what happens.
Remember to take pics of the debris
Turbos are not cheap, nor the bits it will take with it
RangeRoller dt
Well-Sprung Member
That’s with a complete OE system too
Not an aged one with b**tpart bits n bobs etc.
Stustrong had an enormous intercooler like Piercy and few things too. Turbo timer to get it DOWN to 18 - nutter lol.
Scrap yard was close behind.
Not an aged one with b**tpart bits n bobs etc.
Stustrong had an enormous intercooler like Piercy and few things too. Turbo timer to get it DOWN to 18 - nutter lol.
Scrap yard was close behind.
He liked to play. I liked him!
It's ok playing if you know the rules of the game. If you don't have a clue best not to bother. From memory standard boost is 1.2 atmospheres that is 17.64 PSI so 18 PSI was not a big deal.
The programming on mine was done by a garage who fitted the larger intercooler also. No home made twiddling done! Other than the air filter I made.
