Not really. But they would need to remove the drive shaft to do the ball joints. CV and drive shaft come out and go back as one unit. Unless they have been heavy handed hard to see how they have damaged CV boot clip. But if it didn't come off easily before they worked on it it should not come off easily now.
holidaychicken
Well-Known Member
The clips go together with a special tool or you can use pincers
Rangie Disco Sportsman
Active Member
Big strong cable tie and use pair of pliers to pull it uber tight whilst pushing on the little plastic block it feeds through hard with a flat screwdriver and it'll probably hold. The proper stainless steel bands can be hard work to get sufficiently tight without the proper tools.
