sebcom · Aug 16, 2019

Hi,
What do you think of this engine? Looks not so clean to me. Should I worried or do something before to put everything back together?
Thanks!

https://ibb.co/TBTfN9f
https://ibb.co/0VN59d3
https://ibb.co/k4NgTGh
https://ibb.co/t4XdqNL

kermit_rr · Aug 16, 2019

Why did you take the heads off in the first place?

windy81 · Aug 16, 2019

Thumbnails make it easier, hope it helps

sebcom · Aug 16, 2019

kermit_rr said:
Why did you take the heads off in the first place?

Had to replace the head gaskets.

sebcom · Aug 16, 2019

windy81 said:
Thumbnails make it easier, hope it helps

Thanks!

kermit_rr · Aug 16, 2019

I don't know the history, but I'd soak up any water with a cloth, remove any surface rust in the bores with some very fine emery, turn the engine over to check where you can't see them out it all back together.
Check the cams while you're at it and make sure all the lobes are nice and tall

Ratae · Aug 22, 2019

While you've got the heads off strip & clean the rockers & their shafts ensuring the oilways are clear.
As you clean each item slide it onto a length of dowel to be sure they go back into their original positions when refitting. Keep an eye out for any shims under the pedestals when you undo the bolts.

sebcom · Aug 25, 2019

Ratae said:
While you've got the heads off strip & clean the rockers & their shafts ensuring the oilways are clear.
As you clean each item slide it onto a length of dowel to be sure they go back into their original positions when refitting. Keep an eye out for any shims under the pedestals when you undo the bolts.

Done.
Almost finished to put everything back together.

sebcom · Sep 5, 2019

Engine starts, and sounds better than never! No more overheating.
Happy!

JUKE179r · Sep 6, 2019

Looks good!

sebcom

New Member

kermit_rr

Very

windy81

Well-Known Member

Attachments

sebcom

New Member

sebcom

New Member

kermit_rr

Very

Ratae

Well-Known Member

sebcom

New Member

sebcom

New Member

JUKE179r

Well-Known Member

Similar threads