julianf
Well-Known Member
Lots of people cut the line between the turbo and the ip, and insert a tee. I guess i could repair the line after with a straight couple, but there must be a simpler, non-destructive, place to get a reading from?
There's that planked port on the rear of the inlet manifold, but im not convinced im going to have enough clearance (on the disco) for a fitting there (need to check)
This must have been done a hundred times before, so im wondering what others do for a non-permanent installation (if i wanted it permanent, id just cut the line, as per all my search results!)
Thanks
There's that planked port on the rear of the inlet manifold, but im not convinced im going to have enough clearance (on the disco) for a fitting there (need to check)
This must have been done a hundred times before, so im wondering what others do for a non-permanent installation (if i wanted it permanent, id just cut the line, as per all my search results!)
Thanks