Hi again, I have finally got round to ditching my EDC pump for mechanical.
I have changed to pump with the locking tool but the crank pin will no fit. The flywheel slot for the pin is visible in the big hole under the blanking cover, so am I correct in thinking that the crank is mistimed but the electronics could over come this?? And now I am going mech I will need everything lined up correctly.
Just checking before I strip everything down.
I have changed to pump with the locking tool but the crank pin will no fit. The flywheel slot for the pin is visible in the big hole under the blanking cover, so am I correct in thinking that the crank is mistimed but the electronics could over come this?? And now I am going mech I will need everything lined up correctly.
Just checking before I strip everything down.